Amped Wireless APA20 Setup – A Comprehensive Guide
Amped wireless APA20 is a high-power dual band AC WiFi access point that helps in amplifying the signals emitted by the existing networking device. The device comes packed with ten amplifiers – four 5GHz amplifiers, two 2.4GHz amplifiers, and four low-noise amplifiers. This Amped wireless access point is capable of offering up to 8000 sq. ft. of WiFi coverage due to its high-gain antennas. Not only this, but it also allows you to stream HD videos on multiple devices at the same time. The best part is that you can set it up in the easiest way. Let’s find out how.
How to Do Amped Wireless APA20 Setup?
1. Unbox Your Amped Device
Let’s get started with unboxing. Make sure you take every content out of the box. They are:
- Amped high-power wireless APA20 dual-band WiFi access point
- Three detachable high-gain antennas
- A power adapter
- An RJ-45 Ethernet cable
- Setup guide and a desktop stand
2. Power Up the Amped Access Point
Once unboxing is completed, attach the antennas and power adapter of Amped wireless APA20 to their respective ports. Right after that, connect the power adapter of your Amped access point to a working power socket.
Don’t even think of plugging your access point into a damaged power outlet. Doing so will not only supply insufficient electricity to your WiFi device but also expose it to the risk of permanent damage.
3. Create an Ethernet Connection
The time has come to rope in the RJ-45 Ethernet cable you’ve received with your Amped wireless APA20 access point. So, use it to create the connection between your access point and the existing networking device. But, before putting it to use, consider checking its physical condition. Is it damage-free? Is it flipped at any point? If the first question has received a vote, then you are good to go. Just in case the second question wins the poll, then you have to use a new Ethernet cable.
However, the damage-free status of the cable is not the only thing that needs to be taken care of while installing the Amped wireless access point. Your aim should also include creating a finger-tight connection. A loose cable connection won’t let you complete the setup process.
4. Run a Web Browser
Are you done establishing a stable Ethernet connection? Good! Now, move to your PC or laptop and switch it on. Keep in mind that the device being used to install the Amped wireless APA20 access point must be running on an updated OS version. Once your device is ready for use, open a web browser.
But, wait! Is the web browser you’ve just opened free of cache and cookies? No? Well, delete them right away. Additionally, consider installing the latest updates of the internet browser so that you won’t face any trouble in the future.
5. Visit setup.ampedwireless.com
As soon as the web browser opens, you need to navigate the mouse cursor to the address field and click there. Thereafter, input the default web address of your Amped wireless access point and press the Enter key. FYI, the default web URL of your Amped wireless APA20 access point is setup.ampedwireless.com.
There should be zero typos in the web address entree. Also, this is to inform you that you cannot access the default web address of the Amped access point via the search bar of the web browser. So, always use the address bar.
As soon as you access the default web address of your Amped APA20, a dashboard consisting of various instructions will show up. This dashboard is also known as Amped wireless setup wizard. Here, walk through the instructions appearing on the screen and complete the installation process.
What to Do After Amped Wireless APA20 Setup?
There are lots of tweaks required after you install your Amped wireless access point. But, the most important thing that you must do is assign an Amped wireless login password to your device.
For this, you need to access setup.ampedwireless.com again and navigate to the Management section. Thereafter, fill in the required details and save the settings. Use the login credentials assigned to your Amped wireless APA20 to access its dashboard from now onwards. Once done, you also need to set the system clock, network SSID, and network security key, and tweak a few additional settings.
Final Words
That’s all about how you can set up the Amped wireless APA20 access point with ease. We hope that the aforementioned information will be helpful for you in making your Amped access point up and running. However, you can contact our experts at any time of the day in case you feel stuck with the setup process or need help changing the access point’s settings.
