June 3, 2022
Looking to Setup Amped Wireless SR300 Extender? Let’s Help!
Have you recently purchased an Amped Wireless SR300 extender? Well, you have made a great choice. After configuring the WiFi extender, you need not worry about poor internet speed. But, do you know how to setup Amped Wireless SR300 extender? No? Fret not! You have reached the right post. Here, we will provide you with the step-by-step guidelines to do Amped Wireless SR300 extender setup. So, let’s get started.
Before You Setup Amped Wireless SR300 Extender
Below mentioned are a few requirements you need to fulfill in order to setup Amped Wireless SR300 extender in a hassle-free manner:
- A PC or laptop
- A wall outlet
- The default web address of your Amped Wireless SR300 extender
- An Ethernet cable to connect your WiFi devices
- A web browser to access the Amped extender’s dashboard
Moving on, let’s discuss the steps to setup Amped Wireless SR300 extender.
Steps to Setup Amped Wireless SR300 Extender
Step 1- Unbox the Amped Extender
Let’s commence the process of Amped Wireless SR300 extender setup with the unboxing. Take your wireless extender out of the box. If there are antennas available, take them out too. Once done, attach the antennas to your Amped Wireless SR300 extender.
Step 2- Power Up the Amped SR300 Extender
Now, connect your Amped Wireless SR300 extender to a wall outlet near the host router and press the Power button. However, ensure that the extender is receiving a fluctuation-free power supply. For this, always use a damage-free wall socket to power up your Amped Wireless SR300 extender.
Step 3- Create Extender-Router
The next step to setup Amped Wireless SR300 extender is to establish a connection between WiFi devices. So, grab the Ethernet cable and connect its one end to the Amped Wireless SR300 extender and another to the host router. Make sure that the connection is finger-tight.
Step 4- Open a Web Browser
After connecting your Amped Wireless SR300 extender to the host router, switch on your PC. If you are using a laptop, ensure that it has enough charging so that you can setup Amped Wireless SR300 extender without hurdles. Open a web browser. Just ensure that it is not accumulated with cache, cookies, and browsing history.
Step 5- Access the Amped Setup Page
Now, take the cursor to the URL field of the web browser and type the default web address of your Amped Wireless SR300 extender. Press the Enter key. You will be taken to the setup page of your Amped range extender. In case you fail to access the Amped setup page using the default web address, use the extender’s default IP address. For, this check out the extender user manual.
Step 6- Follow On-Screen Instructions
On the Amped extender setup page, you will see a set of instructions. Walkthrough these instructions carefully to setup Amped Wireless SR300 extender. Lastly, you will see the Congratulation screen indicating that you have successfully setup Amped Wireless SR300 extender.
This is how you can make your Amped Wireless SR300 extender up and running with ease. On the off chance you failed to do so, it means you might have lagged somewhere. So, read the next section to know where you went wrong during the Amped Wireless SR300 extender setup process and what can you do to rectify the mistake.
Fixed: Can’t Setup Amped Wireless SR300 Extender
Fix 1- Use a Damage-free Ethernet Cable
You might have failed to setup Amped Wireless SR300 extender due to a damaged Ethernet cable. Know that a damaged Ethernet cable means poor communication between your WiFi devices. So, replace the old Ethernet cable with a new one. In case you lack time to buy a new cable, consider connecting your devices using a wireless source. But, mind the distance between your Amped Wireless SR300 extender and the host router.
Fix 2- Disable Antivirus Application
Sometimes, antivirus software or firewalls installed on the PC creates hurdle during the Amped Wireless SR300 extender setup process. The reason being they prevent access to networking sites including the extender’s default web address. Thus, temporarily disable them on your PC and see if you get success with the extender setup process.
Fix 3- Do Not Commit Typos
To reach the Amped extender’s dashboard for the first time, users need to access the default web address. However, maximum users fail to setup Amped Wireless SR300 extender due to the wrong web address. If you have also done the same mistake, mend your ways right away.
Installing the Amped SR3000 extender will take your digital journey to a whole new level. Here’s to hope that you will be able to setup Amped Wireless SR300 extender with the help of the guidelines discussed above. In case you need help with the extender set up and management process, do not hesitate to contact our experts.